DiGidot C4

4.4 (10)

Events | 12.2MB

Deskripsi

This application works only with a DiGidot C4 devices!
The DiGidot C4 is a small powerful LED controller, that suits all kinds of situations. One DiGidot C4 drives more than 6000 single LEDs. Furthermore, it supports 30+ IC types and various industry standards. This is all you need in LED and show control.
With this application you can setup the DiGidot C4. You can adjust the number of universes, the type of LED (the LED light IC chip) and route them to a preferred output. Are you using multiple DiGidot C4’s daisy-chained or in a network? Name them the way you want and give them a unique IP address to easily recognise them in your project!
By using the DiGidot C4 with a 'Extended' license you can easily record scenes. After recording, there are several options that come with the playback. You can play/stop a scene and delete it if unnecessary. In addition, scenes can be downloaded and transfered from one C4 to another. Note that scenes are strictly compatible with C4s with identical configurations. When a recording is done with several DiGidot C4s the play button will depict the content on every C4, regardless which C4 is chosen.
Once you have the scenes on your microSD there are several ways to start scenes, apart from the application Playback. To do this you need to add triggers. The C4 has multiple trigger types. For example, you can chose a scene at the moment that the C4 is booted. The C4 is also equiped with a 3.5mm barrel jack, which allows analog input to be sent to the C4. Physical switches or even motion sensors can be connected too. With time related triggers can be set, so a specific scene will be displayed or be switched on and off at chosen times. 'Http' trigger makes it possible to trigger scenes with aa http request.
The DiGidot C4 Controller works well with most common LED software used in professional event lighting. The device was thoroughly tested with MADRIX, but we can assure it works well with other software, such as: ArKaos, Chromateq, Pharos and Resolume. Nonetheless, the DiGidot C4 was used numerous times with grandMA consoles.
Aplikasi ini hanya bekerja dengan perangkat DiGidot C4!
The DiGidot C4 adalah kontroler LED kuat kecil, yang sesuai semua jenis situasi. Satu DiGidot C4 drive lebih dari 6000 LED tunggal. Selain itu, mendukung jenis 30 + IC dan berbagai standar industri. Ini adalah semua yang Anda butuhkan dalam LED dan menunjukkan kontrol.
Dengan aplikasi ini Anda dapat mengatur DiGidot C4. Anda dapat menyesuaikan jumlah semesta, jenis LED (light IC chip LED) dan rute mereka untuk output disukai. Apakah Anda menggunakan beberapa DiGidot C4 ini daisy-dirantai atau dalam jaringan? Nama mereka seperti yang Anda inginkan dan memberi mereka alamat IP yang unik untuk dengan mudah mengenali mereka dalam proyek Anda!
Dengan menggunakan DiGidot C4 dengan 'Extended' lisensi Anda dapat dengan mudah merekam adegan. Setelah merekam, ada beberapa pilihan yang datang dengan pemutaran. Anda dapat memainkan / menghentikan adegan dan menghapusnya jika perlu. Selain itu, adegan dapat didownload dan ditransfer dari satu C4 yang lain. Perhatikan bahwa adegan secara ketat kompatibel dengan C4S dengan konfigurasi yang identik. Ketika rekaman dilakukan dengan beberapa DiGidot C4S tombol putar akan menggambarkan konten pada setiap C4, terlepas yang C4 dipilih.
Setelah Anda memiliki adegan di microSD Anda ada beberapa cara untuk memulai adegan, selain dari aplikasi Playback. Untuk melakukan ini, Anda perlu menambahkan pemicu. C4 memiliki beberapa jenis pemicu. Sebagai contoh, Anda dapat memilih adegan pada saat yang C4 di-boot. C4 juga dilengkapi dengan jack 3.5mm per barel, yang memungkinkan input analog untuk dikirim ke C4 tersebut. switch fisik atau bahkan sensor gerak dapat dihubungkan juga. Dengan waktu yang terkait pemicu dapat diatur, sehingga adegan tertentu akan ditampilkan atau dapat dinyalakan dan dimatikan pada waktu yang dipilih. trigger 'Http' memungkinkan untuk memicu adegan dengan aa permintaan http.
The DiGidot C4 Pengendali bekerja dengan baik dengan yang paling umum software LED digunakan dalam acara pencahayaan profesional. Perangkat ini benar-benar teruji dengan MADRIX, tapi kita dapat meyakinkan bekerja dengan baik dengan perangkat lunak lain, seperti: ArKaos, Chromateq, Pharos dan Resolume. Meskipun demikian, DiGidot C4 digunakan berkali-kali dengan konsol nenek.

Show More Less

Yang Terbaru DiGidot-C4

- Better support for mobile/tablets with ethernet connection.

Informasi

Perbarui:

Versi: 3.1.4

Butuh: Android 5.0 or later

Rating

BAGIKAN

Kamu juga suka