PEAs2 Check kWh Meter
4.4
Produttività | 53.0MB
Descrizione
PEA S2 Check kWh Meter Application is for the electric power (kW), while it draws the rotor of the electric meter.
** Using
1. Enter the rev / kWh from the name plate of the meter.
2. Enter the number of rounds to be held around the dial.
3. Mark platters (black bars) to the central branch press Start.
4. Wait until the rotor reaches the designated number, press Stop.
5. It has the power (kW), while the meter at that time.
To calculate the electric power sector housing.
1. Type Rate
2. Enter the Electronics Unit
3. Enter the wallet ft unit. You can look at the current month. www.pea.co.th
4. Calculation results are calculated.
Notes are only preliminary
Show More
Less
Cosa c'è di nuovo PEA s2 Check kWh Meter
เพิ่มการคิดค่าไฟฟ้าบ้านอยู่อาศัย
Informazione
Aggiornata: 2016-10-15
Versione corrente: 0.0.1
È necessario Android: Android 4.0 or later