SatFinder - Satellite Director

Satellite Director is a tool to help you know all the things on the satellite to find satellite TV and satellite alignment use your pointer to see the augmented reality of the camera to see and target the dish search satellites in the sky
The result is displayed both as numerical and graphical data
Satellite Director (Satellite Finder) is a tool that will help you set up a satellite dish. It will give you azimuth, satellite director elevation and LNB tilt for your location (GPS-based) and selected list satellite. The result is displayed as numerical and graphical data on google maps. He also built into the compass that will help you satellite director to find the appropriate satellite azimuth. It can also use augmented reality to show the satellite director where is the satellite on the camera tool view.
Finding a TV satellite or an antenna, in azimuth, can be pretty difficult. Before you can find it with a compass you have to do some calculations using GPS location, magnetic variation, compass azimuth and satellite azimuth.
Setting up your satellite dish requires a lot of calculation and skill, to find out where the satellite is to make sure that the installation will free you from obstruction Satellite dish helps you find and point your dish with a minimum of hassle.
Satellite pointer app is a tool that will help you set up a satellite dish. It will give you LNB azimuth, elevation and tilt for your location based on the selected satellite from the list.
How it works?
Simply turn on the GPS in your phone or GPS rental, select the desired satellite or satellite TV rental. You have found the satellite when the white ball is in the white circle and the cyan ball is in the cyan circle. Align, in azimuth, the satellite dish with the cyan arrow, the satellite dish is aligned with the satellite.
Selectable audio tone, camera preview, continuous mode (no pause), color selectors, or a satellite-defined position can help you find the desired satellite TV.
You can take a photo (resized) by tapping the direction tab. The photo / screenshot is stored ONLY on the phone's memory card.
tips to success:
distance)
calibrate the compass of the phone by waving it in a figure 8 before you start
optional: calibrate the compass of the phone by rolling your phone along its length axis about 2-3 turns (works on some phones)
This app contains a set of instructions that will help you install on all satellites around the world and we hope this Satellite Locator app will help you and get your admiration
First, you need to turn on GPS and Internet on your phone. Remember - in most cases, it is impossible to receive the GPS signal inside buildings. So, if you want to get a very specific location - go near the windows or go outside.
Unfortunatly you have to calibrate the compass before using it.
Metal covers/cases or covers/cases with metal/magnetic closure will influence/disrupt the compass of your phone or tablet. Do not use these covers !! The compass of your phone can also get inaccurate because it is affected by other electro - magnetic fields or because it is weakened by age. Calibrating the compass may not help anymore
do NOT go to close to the iron dish, iron lnb arm or iron pole (keep at least 30 cm
The azimuth, altitude and tilt angle are calculated for your location and the chosen satellite. Below the calculated values, there is a compass with a graphical representation of the azimuth angle. The azimuth angle is calculated with a magnetic tilt.
Activate the location capabilities of your phone (or enter the location in the settings menu), then select a satellite from our long list. The solution for the satellite will be displayed and an arrow will point to the location if it is off the screen. The satellite is aligned when the satellite icon is centered in the crosshair.
Thank you.