Bluetooth Control for Arduino

Paglalarawan ng Bluetooth Control for Arduino

Arduino Bluetooth Relay 4CH app ay Android application na ginagamit upang kontrolin ang 4 channel relay module sa pamamagitan ng Bluetooth na may Bluetooth serial komunikasyon module suporta HC-05, HC-06, o HC-07, gamit Arduino o AVR
ako Test sa Arduino Uno at Serial Commnunication library sa konektado RX PIN 10 at TX PIN 11.
Maaari mong gamitin ang Arduino Uno o Arduino Leonardo atbp ...
Fitur App:
-Control 4 channel sa / off ralay
-Control lahat ng channel sa
-Control lahat ng channel off
-Download file program arduino_bluetooth_rralay_4ch.ino
-Download file tutorial pdf with schemmatic
download file:
-Aduino proyekto zip: https://goo.gl/vq1n9d
-Tutorial & eskematiko kable pdf: https://goo.gl/b2uvy1
o maaari mong
kopya ng programa dito Arduino IDE
/ *
Relay In1 Konektado sa Pinout 2 Arduino
Relay In2 Nakakonekta sa Pinout 3 Arduino
Relay In3 Konektado sa Pinout 4 Arduino
Relay In4 konektado sa Pinout 5 Arduino
---> Maaari kang nakakonekta sa relay modul 4 channe l
Serial Data Pagpapadala mula sa Arduino Bluetooth relay 4Ch.apk
Data '1' - '4' to on is Ralay CH 1-4
Data 'A' - 'D' to Off RALAY CH 1-4
Data '9' sa Lahat ng CH 1-4
Data 'i' upang i-off ang lahat ng CH 1-4
* /
#include
Softwareserial myserial (10, 11); // pin10 rx, pin 11 tx konektado sa -> bluetooth tx, rx
#define relay1 2
#define relay2 3
#define relay3 4
#define relay4 5
char val;
void setup () {
pindode (relay1, output);
Pinmode (relay2, output);
Pinmode (relay3, output);
Pinmode ( relay4, output);
digitalwrite (relay1, mataas);
digitalwrite (relay2, mataas);
digitalwrite (relay3, mataas);
digitalwrite (relay4, mataas);
myserial. magsimula (9600);
Serial.Begin (9600);
Walang bisa Loop () {
// CEK data serial mula sa Bluetooth Android app
Kung (Myserial.AVAILABLE ()> 0) {
val = myserial.read ();
Serial.println (Val);
}
// relay ay nasa
kung (val == '1') {
digitalwrite (relay1, mababa); }
Iba pa kung (val == '2') {
digitalwrite (relay2, mababa); }
Iba pa kung (val == '3') {
digitalwrite (relay3, mababa); }
Iba pa kung (val == '4') {
digitalwrite (relay4, mababa); }
// relay lahat sa iba pa kung (val == '9') {
digitalwrite (relay1, mababa);
digitalwrite (relay2, mababa);
digitalwrite (relay3, Mababa);
digitalwrite (relay4, mababa);
}
// relay ay off
Iba pa kung (val == 'a') {
digitalwrite (relay1, mataas); }
Iba pa kung (val == 'b') {
digitalwrite (relay2, mataas); }
Iba pa kung (val == 'c') {
digitalwrite (relay3, mataas); }
Iba pa kung (val == 'd') {
digitalwrite (relay4, mataas); }
// relay lahat off
Iba pa kung (val == 'i') {
digitalwrite (relay1, mataas);
digitalwrite (relay3, mataas);
digitalwrite (relay3, Mataas);
digitalwrite (relay4, mataas);
}
}